转一个国外爱好者做的电动吸锡器

fat · 发表于 2010-6-11 17:02

看到有朋友秀电动吸锡器，让大家口水流了一地，所以转一个国外爱好者DIY的电动吸锡器，估计会有朋友感兴趣，看看哪位朋友有条件的试试。原URL：http://www.teaser.fr/~amajorel/desolder/，《穷人的拆焊台》，在此向原作者表示感谢！

A poor man's desoldering stationDescription
A DIY desoldering station made from a cheap electric desoldering tool and salvaged parts.

http://www.teaser.fr/~amajorel/desolder/station.jpg

My father made this for himself to cope with the amount of rework he was given in the nineties. Bill of materials
You need :

A compressor (salvaged from a fridge),
a solenoid valve (salvaged from a washing machine),
a petrol filter (car parts),
an electric desoldering tool,
an SPST mains switch (light switch),
a momentary mains switch (door bell switch),
some tubing.

An electric desoldering tool that lends itself to this hack is this one : http://www.teaser.fr/~amajorel/desolder/tool.png RS Components/Radiospares used to sell this tool as the "OK Industries electric de-soldering tool item no. SA-6-230" (order code 604-501). Operating instructions. Nowadays, Rapid Electronics sell one branded "RVFM" that looks exactly the same (order code 85-0900). Maplin have a similar product (order code N37CH). ConstructionRemove the desoldering tool's piston. With tubing, connect the pump... http://www.teaser.fr/~amajorel/desolder/tool-modified.jpg ... to a petrol filter... http://www.teaser.fr/~amajorel/desolder/filter1.jpg http://www.teaser.fr/~amajorel/desolder/filter2.jpg ... to the inlet of the compressor via a solenoid valve : http://www.teaser.fr/~amajorel/desolder/inside2.jpgThe outlet of the compressor is left open : http://www.teaser.fr/~amajorel/desolder/inside1.jpgThe SPST switch controls the compressor. The momentary switch controls the valve. Mount it so it can be used as a pedal. The petrol filter is there to keep solder particules and other residues out of the compressor. The one used here is a "Purflux EP58 filtre ?essence". OperationFor those not already familiar with desoldering tools : Put the compressor and switches on the floor under the bench. Power the electric desoldering tool and the compressor. Wait until the desoldering tool has heated up. Touch the desoldering tool's nozzle to the solder blob. When all the solder in the hole has melted, step on the momentary switch. The solder is sucked in. Repeat until all pins are desoldered.

This is http://www.teaser.fr/~amajorel/desolder/, last modified AYM 2008-11-19.

yibin0092 · 发表于 2010-6-11 17:17

真空用冰箱压缩机不错,加热要是能用白光T12可以控温就完美了

chen6527731 · 发表于 2010-6-11 17:51

冰箱压缩机，大而且重些了吧。

九哥 · 发表于 2010-6-12 20:52

这样多么的浪费电啊。。。。。。。。。。。。。。。。。

九哥 · 发表于 2010-6-12 20:52

这样多么的浪费电啊。。。。。。。。。。。。。。。。。

fat · 发表于 2010-6-13 09:31

我想做一个，气泵我手头有了，体积和重量似乎做成手持式的太笨重了，我准备搞成台式的，通过软胶管连接。现在考虑到的问题主要是觉得发热芯和吸咀不好找，如果用现成的电热吸锡器改的话，我手头的黄花842吸锡器只有30W功率，看人家成品的都用到100W，估计是连续吸气时热量被带走，30W的温度不够。但100W的吸锡器市面上也没处买，这我目前没想到办法解决，请大家帮忙出出主意。

jhnewboy · 发表于 2010-6-15 22:34

可以用焊台辅助加热。那吸锡烙铁30W应该就够了，30W主要用来保证吸锡头是热的不会堵锡就可以了

efan · 发表于 2010-6-15 23:06

从论坛首页我看成“转一个爱国者做的电动吸锡器”，晕。。。

社建电子 · 发表于 2010-6-16 19:03

可以使用电炉丝，自制个低压烙铁，功率想要多大都可以。

hldiy · 发表于 2010-6-16 19:18

吸锡器的风不能是连续的，只是在工作的时候吸一下。
我做过，软管会瘪掉的。还在找适合的管子

		自动登录	找回密码
密码			请使用微信账号登录和注册会员

转一个国外爱好者做的电动吸锡器

浏览过的版块